How to tell grid densification from new grid extension in a monthly light read

A rural village nestled among rolling hills with power lines running through it at sunset.

A pixel brightens on your monthly read. Is that the new feeder you financed finally reaching a settlement, or is it a village that already had power three years ago, now running more shops and taking up more household connections off the same line? Your disbursement conditions probably care about the difference. Your results framework definitely does, if it's written around "villages newly connected" rather than "villages with rising consumption."

At 250 m panchromatic resolution you won't see a transformer or count meters. The shape of the change over a few months tells you enough to separate extension from densification.

What new extension looks like in the pixel record

New extension shows up as light appearing where there was none in the baseline frame. Pull the frame from before financial close, or before the energization date in the project's own reporting, and compare it against the settlement footprint as drawn at appraisal. If a cluster of pixels that read as dark ground for twelve straight months suddenly crosses your brightness threshold and holds, that's a new node on the grid, not uptake on an old one.

The geometry usually gives it away too. Extension tends to trace the alignment: a thin, elongated run of newly lit pixels following a road or a feeder corridor outward from an already-lit town, sometimes with a small bright knot at the far end where the line terminates at a new substation or a cluster of first connections. It's a line shape pushing into dark territory, not a blob getting denser in place.

Timing matters as much as shape. A genuine extension event tends to produce a step change, a frame-over-frame jump once energization happens, followed by a flatter period while households sign up. If the project's commissioning date is March and your lit-area count for that settlement jumps between the February and April reads, that lines up. If it's been creeping up by a pixel's worth of brightness every month for a year with no step anywhere, you're probably watching densification on a line that was already live.

What densification looks like, and why it still matters

Densification is brightening inside a footprint that was already lit at baseline. The pixel count above threshold barely moves. What moves is the sum of brightness across the pixels that were already counted, month over month, as more households in an already-electrified settlement take connections, run a second light, or keep a shop open into the evening. No new geometry, no new corridor, just the same patch of ground getting a little hotter in the readout.

This is not a problem signal. For a programme built around last-mile connection rates rather than line-km, densification is the metric you want to see move, and a flat lit-area count next to climbing intensity is exactly what uptake looks like between the baseline survey and the next one. The mistake is reading that intensity climb as "new villages reached" when it's really "same villages, more meters." Conflating the two inflates your connection count against a disbursement tranche tied to settlements newly served, which is the kind of discrepancy that surfaces at the next portfolio review and is awkward to explain after the fact.

The two readings also fail differently at the edges of your 250 m resolution. A settlement that straddles a threshold, half served at baseline, half not, can look like modest densification in the monthly series when what actually happened is a short extension into the unserved half. That's the case worth flagging for a ground check rather than resolving from the pixel record alone. The light read tells you where to look between surveys. It doesn't replace the survey.

A disciplined read tracks both numbers every month: lit-area pixel count against the settlement footprint, and total brightness within that footprint. Area up means new ground reached. Brightness up with area flat means existing connections deepening. Area and brightness both climbing at once usually means a project is doing both at the same time, extension and uptake running together, which is a reasonable thing for a programme to look like mid-disbursement.

Electrification Map builds the monthly frame your programme area needs to run exactly this comparison, settlement by settlement, between your formal surveys. If you're tracking grid extension against a disbursement schedule, it's worth seeing what your project footprint looks like in next month's read.

Start a project

Back to the blog